16mf.com
产品详细介绍
软管泵属于蠕动泵的范畴，主要是由一根特制的橡胶软管，对应泵体内转子总成上的一对压辊，当压辊沿着橡胶软管转动时，压辊与泵壳产生的挤压力将橡胶软管压扁，在软管自身弹性和侧导辊的强制下，通过恢复原状产生的真空吸入流体物料，物料在压辊的机械挤压下从管内排出，如此往复循环，从而达到连续输出物料的目的。
The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.
豫信致诚机械设备(徐州市分公司)生产的 软管泵从每个细节做起， 软管泵产品都力争作到精益求精。作为中国企业走向世界的准入证，“信誉”代表了我公司的市场名誉，得到了广大客户，科技发展，诚信为本”是我公司不变的追求。
还有一种食品级橡胶软管泵，它的内衬的橡胶层需要达到了食品卫生的要求，同时也需要符合EHEDG或者其他卫生级的要求。还有三元乙丙橡胶软管泵，这种一般适用于绝大多数腐蚀性的化学物质和无机物，内衬橡胶层由三元乙丙橡胶构成，外层也是完整的三元乙丙橡胶。这样的软管具备很强的抗化学腐蚀的特性。以及CSM软管泵，它适用于特别腐蚀性的化学介质，如：强氧化溶剂。软管的内层是CSM，外层是天然橡胶。运行温度达到85℃/185°F。
There is also a food-grade rubber hose pump. Its rubber layer must meet food hygiene requirements, and it must also meet EHEDG or other sanitary requirements. There is also a EPDM hose pump, which is generally suitable for most corrosive chemicals and inorganic materials. The inner rubber layer is composed of EPDM rubber, and the outer layer is also a complete EPDM rubber. Such hoses have strong chemical resistance. And CSM hose pump, it is suitable for particularly corrosive chemical media, such as: strong oxidizing solvents. The inner layer of the hose is CSM and the outer layer is natural rubber. Operating temperature reaches 85 ° C / 185 ° F.
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
